There might be many reasons that you want to remove your vehicle vinyl wraps, such as faded or damaged corners and edges, to get a new coler and design, or become too much bored with the same coler from several years.
Now, you are definitely worried about how to remove vehicle wrap safely, so in this guide the good news for you is that you can remove your vehicle vinyl wrap very quickly and easily by following the unique method described below.
Remember one thing that you have to be patient while doing this job. At the end, you will get a bonus tip to keep your car new vinyl wrap for long time maintain. so keep reading until the end and enjoy!
How do you safely remove your vehicle vinyl wrap without damage or residue?
Removing car vinyl wrap is not a big challenge, you just to be cautious for this job. By using the right tools and by following described method below, you can easily remove vinyl wrap from your vehicle without damaging and residue.
Necessary tools for removing vehicle wrap
- Heat Gun
- Plastic scraper / squeegee / plastic razor blade
- Adhesive remover spray
- Microfiber cloth
Optional tools
- Gloves and goggles
- Water and mild detergent / soap
Genuine Method for vehicle/car removing vinyl wrap
Removing vinyl wrap car is not very difficult but time-consuming job. It can take almost 7 to 8 hours or depending upon the quality of the vinyl. It can take less time also if the vinyl has the good quality. Follow the below instructions for removing vinyl wrap quickly and easily
Managing weather environment to remove car vinyl
You have must keep your car in a temperature-controlled environment such as a garage or indoors. To make this job easier and faster, you need a sunny day, neither hot nor cool too much. It will be much easier to temperature 70°F-80°F (21°C-27°C).
Heat the vinyl wrap with Heat Gun
At the very first,you have to heat that vinyl section which you want to remove. Start to heat from a corner. Keep the heat gun 6 to 12 inches away from the vinyl surface. Slowly move the heat gun back and forth on the vinyl for better distribution of heating. You have not to stay or too close on a spot for too long, it may the vinyl start to burn or bubble stuff
You have to heat the vinyl as to touchable, you have to never too much heated it that you need to use the gloves: just heat it normal neither too hot nor too cold. In the processing removing if the vinyl become cool you have to reheat the vinyl for better result
Peel off the vinyl wrap with Plastic Razor Blade
After heating the vinyl, start from a corner. Get your fingernails under the edge of vinyl and start to peel off back gently and smoothly. Remember, you have to peel back vinyl at 45 degree angle
Don’t peel back vinyl too much fast as it can be risky for your original paint of car, you have to just peel off the vinyl slowly and smoothly
If you feel uncomfortable peel off with fingernails, you can use plastic razor blade also. Get plastic razor blade underneath the edge of vinyl and pull it up slowly at 45 degree angel
Noted: you have to not use any abrasive or sharp instrument (knife,scissors, or screwdriver) in the whole process. Even wrong use of your credit card in this proces can damage or leave the scratches on the car paint
Reheat the vinyl
While in the process of removing vinyl you have to reheat the vinyl. While removing the vinyl slowly and smoothly when you feel vinyl become cool or not peel off easily then reheat the vinyl again with the heat gun and continue the same proces again. Reheat process can help more in peeling the rest vinyl.
Remove vinyl residue with adhesive remover spray
However, you have almost done your job. After removing the vinyl from your car now its time to clean all the vinyl residue on the car surface. Use Rapid Tac or 3M citrus based adhesive remover. Well both are perfect.
Now spray the adhesive remover on the surface of car where you see vinyl residue and leave it for a minute to set it. Then take a microfiber cloth and smoothly wipe it. You can repeat spray the adhesive remover if the residue still appear and then gently wipe it with cloth.
Now finally you done your job and successfully remove your car vinyl wrap. Now you can enjoy a new design,coler and a new look of your vehicle
Can you remove vehicle/car vinyl wrap without Heat Gun?
Yess, you can easily remove your car vinyl wrap without using a heat gun. No doubt the heat gun helps to loosing the adhesive under the vinyl to making it peel off easily and smoothly but you can also use some alternative method without heat gun such as below
Remove car vinyl warp with Sunlight
Sunlight plays a key role to heat the vinyl. park your car in the sunny temperature about 70–80°F (21–27°C) and leave it almost 3o to 40 minutes. When you feel the vinyl get warm and looking as soft stuff, then start to peel off the vinyl edge from a corner. Leave the car again in sun light for 30 to 40 minutes if you feel difficulty while removing process.
Noted: you have to this only in sunny day neither cold or cloudy
Remove vinyl wrap with Warm Water
You need to warm water not boiled or too much warm that become untouchable. Spray the warm water on the section which you want to remove. Leave it for the 2 to 3 minutes then start to peel off the vinyl from a corner.
Noted: you have to follow the same method for vinyl peel off in any your choose method
Remove car vinyl wrap with Hair Dryer
Use hair dryer to heat the vinyl. Keep the hair dryer almots 6 to 7 inches away from surface and slowly move it back and forth. Dont overheat any spot. You have to heat the vinyl with hair dryer for just few seconds and after that you have to do same proces like start from a corner to peel off the vinyl and rest the process
Can you remove car vinyl wrap on your own?
Yess, you can easily remove your car vinyl on your own. Its too much easy to do. You have to just follow the all of methods and instructions to remove this. To safe from any surface damages like paint damages or any scratches, read all the instructions carefully again and do your job perfectly.
In case if your car vinyl wrap is too much old like from 8 to 10 years or having very low quality and you are feeling it hard to doing this. Then you can aslo give this job to professionals car vinyl wrap removing experts.
Is it difficult to remove car vinyl wrap?
Removoing vinyl from your vehicle might be challenging in such cases that are below:
- It can be easier if vinyl is one year or two years old
- It can be litlte challenging if your vinyl is old about 3 to 4 years
- It can be much difficult to remove the vinyl if it about 8 to 10 years old
The difficulty of removing the vinyl also depends upon tha quality of the vinyl. If the quality of vinyl is too much low then definitely it will take time and difficulty. To safe from dificulty and damage follow the all instructions mentioned above
Can removing the vinyl wrap harm the Car Paint?
If the quality of your vinyl is good then removing process cant be damage your car paint. If you heat the vinyl careful like you have to not overheat any spot as it can burn or bubbling your underneath car painT
If you work patiently and slowly: Heat Up, peel slowly and do this at low angel. So, you have to removing the car vinyl in the right way and with patience. Then you will does not face any residue or any car paint damages
How much the car vinyl long last?
The longevity of car vinyl always depends upon its care routine, the weather in which it is parking. Or might be chances you have inherited the vehicle and it about to much old.Mostly with the good quality the vinyl can long last on your vehicle such as for 6 to 7 years.
But if you have the low quality vinyl then after 3 to 4 years it start to automatically peel off from edges. The weather plays an important role in long life for your vinyl as if you park your vehicle under shadow, not in too much sun heat then you can save your vinyl for long time
Benefits of removing car vinyl wrap
By removing the vinyl wrap from your car can give you some unique benefits as:
- You will get totaly new look of your car
- You can change your car to your own desire color, design
- You can advertise your business by change your car vinyl wrap
- You can save your original car paint by removing old or low qualit vinyl
- You can make it a brand by changing your car vinyl wrap
Bonus Tip for your new vehicle vinyl wrap safety and longevity
Now you have successfully removed your old and boring car vinyl wrap and get a new vinyl wrap. So at the end, here is the extra bonus tip to safe your car new vinyl for longevity and maintain its appearance.
Keep avoid your new car vinyl from a direct sunlight. If you keep your car in a cool and normal environment like in a garage or indoors then you can enjoy your new car vinyl for a long time.
Conclusion
Its possible you get bored by living your vehicle old vinyl or inherited car vinyl. It might be another reason like it starts to peel off automatically from edges and corners. But it doesn’t matter which the reason, the thing is that you can easily remove vehicle vinyl wrap by yourself easily and quickly.
To do it perfectly you have follow the all instructions mentioned above such as heat the vinyl then slowly peel off the vinyl from the edges. Must use the adhesive remover spray to clean all the residue with the right method that is mention above
Peel off the car vinyl wrap is a time assuming job and depending upon the quality of vinyl. If the vinyl is too much old like its about 7 to 8 years then the removing process can take almost 7 to 8 hours. You have to be patient while doing this job because if you do it fastly or with not right way then you can face the car paint damages.
Related: sometime you decided to sell your vehicle, then buyer can ask you for sharing your Vin of vehicle, So read carefully this guide Is It Safe to Share VIN Number? before giving to him the Vin Number.
Frequently Asked Questions
How you can remove vehicle vinyl wrap adhesive?
To remove vehicle wrap adhesive you need the adhesive remover (you can use Goo Gone trustly). Take a soft microfiber piece of cloth. Soak this cloth with the adhesive remover and place it over the adhesive. Left it for one or two minutes and then peel it off with the plastic razor blade. Keep it smoothly and gently so that any scratch doesn’t come to the surface.
Wipe the surface with the cloth and then wash that surface with the clean water and soap.
Do you take your vehicle to an expert for removing the car vinyl wrap?
It is not much necessary to take your vehicle to the expert or professional for removing the car vinyl wrap. You can easily remove your car vinyl wrap by yourself. You need to just follow the right instruction as it is mentioned in this article. Heat the car vinyl wrap, Slowly peel off the vinyl from the edge and use the adhesive remover to clean out the residue. After that wash your car with clean water and soap.
Do you have just use only Heat Gun to heat the car vinyl wrap?
NO, you can use the alternative instruments to heat gun such as:
1. You can use Hair Dryey to heat the vinyl wrap
2. You can use the direct Sunlight to heat the vinyl wrap
3. You can use Warm Water to heat the vinyl wrap
How to remove vinyl?
If you want to remove vinyl from your vehicle (Truck, Car, Auto, Bus) then must keep following these easiest steps:
Heat the vinyl with heat gun or hair dryer. Then gently and smoothly peel off the vinyl from the edge in a corner with the uses of plastic razor blade or your fingernails. Don’t Do it fastly otherwise it will left over scratches on the surface or can harm the original car paint. Then use adhesive remover spray to removing all the residue from the surface. Just spray, leave it for one to two minutes then clean it with a microfiber piece of cloth.